Home Page

In October 2008 PRI was authorized by the I.R.R.A to refurbish the ProSlot Euro Mk 1 4002 and 4002B sealed motors

I take a great deal of time to insure that your motor is in the best condition it can be within the IRRA and PRI guidelines. My pricing may be a bit higher than the other authorized refurbishing center but I feel you are going to be pleased with the workmanship and service you receive. Here are the costs:

Basic refurb with a motor that has a PRI seal - $12.00 includes new springs, and motor brushes only
Basic refurb with a motor that has a PRI seal - $14.00 includes new springs, and motor brushes, & bushing/s if necessary.
Basic refurb with a motor without a PRI seal - $16.00 includes new springs, motor brushes & bushings if necessary

Freight is charged seperately. I use Priority mail and the charge is usually $4.80 with my Postal discount. I will charge accordingly.

If your motor requires new parts like a replacement endbell, hardware, etc., retail prices on those parts will apply. No extra for labor. It is best to provide Visa/Mastercard information so if there are charges beyond the basic refurb cost I can charge appropriately. You can call me to set up your customer account or provide the information in a note with the motor/s. I will need card holder name, card #, expiration date and the 3-digit security number on the back of the card. I will also accept cash, postal money orders, and personal checks. Be sure to include a full mailing address and a phone number that I can reach you during the day. If I see something you should know about I will call you. Your email address would be useful too if you would please provide it. Thanks in advance.

A basic refurb is:

  • Dissassemble your motor
  • Ultrasonic clean everything / rinse and dry
  • Inspect the setup for defects and needed adjustments
  • Test to see if the magnets are properly glued in / reglue as needed.
  • Zap the setup
  • Drill endbell holes if needed and install screws
  • Align the brush hoods
  • Recondition the armature
  • Reassemble your motor
  • Radius new ProSlot Gold Dust premium motor brushes and install
  • Install new ProSlot / OEM springs
  • Attach motor seal
  • Breakin motor
  • Replace your motor box with a new PRI box