BING BANG FOR THE BUCK !
-
This comm lathe was designeed for both RC and Slots. It has all the features of a Hudy at quite a savings.
-
This is a no frills machine but tested out great.
-
Has a built in adjustable V-Block similar to the Hudy Adjustable support. Just turn the adjustable screw and move the V-Block to the distance you need. This is a hudge savings over adding the moveable V-Block to the Hudy.
-
Two steel rods support the v-blocks and I could find no taper present on the comms I cut with this machine.
-
I have milled down the front side of the V-Block to allow added clearance with the cutting tool so you can use any normal cutting tool without it hitting the v-block.
-
Don't forget to purchase the PRI-hex wrench kit if you don't have metric wrenches.
-
If you want one of these already assembled with a diamond installed I have these available too.
Track Owner pricing available upon request
| 
